MODEL:QPDDL10 Data rate:Operation from 0 to 10 Gbps (5 GHz) Number of programming bits per channel:7 Resolution:5 ps Range:640 ps Accuracy:5 ps RMS error:<3 Output skew:(+ps) 10 Maximum error between consecutive delays:1 LSB Jitter:<10 ps, 3 to 5 ps typical, for all delay conditions. Delay error due to channel-channel crosstalk: <2 ps total Delay line inputs and outputs:ECL compatible Output 50 ohm termination voltage:-2.0 V Output high:>-0.95 V (50 ohms to -2.0 V) Output low:<-1.75 V (50 ohms to -2.0 V) Rise time:<45 ps (20 to 80%) Fall time:<45 ps (20 to 80%) Output current source:17 mA Output current sink:0 mA Input threshold:-1.3 V (adjustable) Input requirements:amplitude 0.4 Vpp Input high :>Vth+0.2 Input low :<Vth-0.2 slew rate :>2V/ns 100 ps min. input pulse width Input Termination:50 ohms to -2.0V Insertion delay:275-325 ps Control inputs:TTL compatible Control signal setup time for latching:0 ns Control signal propagation delay:28 ns Delay-state switch time:12 ns Power supply:-5.0 V, 0.6 Amp. Temperature dependent delay:<0.05 ps/(0F ) @70 0F, 635 ps Warm up time:at least 2 min. (15 nom.) to reduce thermal drift Physical Dimension:3.8 x 2.75 x 0.6 inches (excluding connectors)