Two identical transceivers, interchangeable
Fault LED
Transmitter and receiver are usable on different voltage levels
Automatic switching of the pull-up-resistors for operation in 12V- and 24V-systems and display
via LEDs
Transmission capability: DC – 30 kBaud
Ubat: 5 V < Ubat < 35 V
Guaranteed susceptibility: ê = 400 V/m
Pull-up-resistor
for 12V systems: 510 Ohm
Pull-up-resistor
for 24V systems: 1 kOhm
Input capacitance of the K-Line: Cin < 2 nF
Housing: aluminium, connected to ground
Housing dimensions: 100 x 80 x 50 mm
Electrical connectors: K-Line female connector, green
Ubat female connector, red
Ground female connector, black
Optical connectors: RX receiver input
TX transmitter output
