Cable Measurements：Cable Testing and ID: up to 1000 ft (305 m)
Split Pair Detection: 3 ft (1 m) to 1,000 ft (305 m)
Length Measurement: 0 to 1,500 ft (457 m), ± (5%+1ft)
Supports 8 continuity and ID number remotes (RJ-45)
Supports 20 RJ-45 and 20 F-connector ID only remotes
Power over Ethernet：Tests for IEEE 802.3af and IEEE 802.3at (PoE Plus) compliant PoE
Tests for classes and loads cable up to 25.5 watts
(at class 4) Identifies Mode A or B (pairs with PoE
Active Ethernet ：Indicates advertised speeds of 10/100/1000base-t half or full duplex Can Link to network at 10/100base-t
Maximum Voltage：Parameters refer to the maximum voltage that can be applied
to any 2 connector pins without causing damage to the tester.
RJ Jack: 66 Vdc or 55 Vac
F-connector: 50 Vdc or Va
Save Test Results：Stores up to 250 Cable or network tests with user defined names
Tone Generation：Tone Frequencies: 730 Hz and 1440 Hz
Languages：English, French, Spanish
Battery Life：For 6 x AA, 9VDC, 2,200 mA-hr (typical) alkaline battery:
Operating – 20 hours typical
Standby – 1.5 years typical
(200uA max standby current)
Batteries are included
Altitude：10,000 ft (3048 m) operating
Temperature：Operating: 32 to 122°F (0 to 50°C)
Storage: -22 to +140°F (-30 to 60°C)
Humidity：10 to 90% non-condensing
Enclosure：High-strength PC/ABS plastic with V0 rating with boot
Withstands 4 foot drop on to concrete
Size ：1.85”H x 3.6”W x 6.8”L (4.7 x 9.15 x 17.3 cm)
